0 product(s)
progress indicator
Adding product...
Do not delete this link

Set of 2 Bronze Bushings

Item No. BUSH
5/8" bronze bushing used in all SnoWizard® machines built prior to 1983 that use thrust bearings. There are 2 of these bushings in the cylinder and they have internal grooves to hold grease. The grease should be cleaned out every 2 weeks and replaced with fresh grease. The cold-rolled shaft spins inside of these bushings and the bushings will wear over time and need to be replaced. Usually every 3 years depending how often they are greased. These bushings are not "press to fit" which means that they must be reamed to 5/8" after they have been inserted in the cylinder.
(0 reviews)
Reviews (0)
There are no reviews yet.


Subscribe to Our Newsletter.
© Copyright 2024 SnoWizard, Inc All rights reserved.